linux
-
Setting Up OPNsense as a Load Balancer
In this post, we’re going to setup OPNsense as a Layer 4 and Layer 7 HAPROXY load balancer. This is our network topology: In this simple topology, we have a single firewall with two ISPs connections and a LAN. We’re… Continue reading
-
Setting Up a Redundant Load Balancer with HAPROXY and KeepAlived
In this post we will setup a high redundant load balancer with two HAPROXY and KeepAlived service on Linux Servers. HAPROXY is one of the most implemented open source Layer 4 or 7 load balancer. It’s hosted between the clients… Continue reading
-
Configuring High Availability for OPNsense Firewalls
In this post we are going to set up high availability for two OPNsense firewalls. Our firewalls are installed as VMs in two separate Proxmox nodes in our Lab. All our VMs in our Cluster use OPNsense to connect to… Continue reading
-
Setting Up OPNsense as a Zabbix Proxy
In this post we are going to set up OPNsense as a Zabbix Proxy to watch all hosts that are behind the firewall. Check the post for how to set up Zabbix in Docker containers in a Windows Workstation: Note:… Continue reading
-
Step-by-Step Zabbix Setup on Proxmox Clusters
In this post we are going to set up our Zabbix server to watch our Proxmox nodes and cluster. Check the post for how to set up Zabbix in Docker containers in a Windows Workstation: First we are going to… Continue reading
-
Set Up Zabbix Monitoring with Docker on Windows
We want to check our lab environment with Zabbix. Zabbix is a powerful open source monitoring and alerting solution. It can track everything within a Windows or Linux Computer. It can also reach everything accessible with the SNMP protocol, like… Continue reading
-
Installing TrueNAS as an iSCSI Server for Hyper-V Clusters
Before installing our Hyper-V Cluster, we need shared storage on our cluster members. This setup ensures VMs can Live Migrate between nodes without disruption. In this post we’re going to install TrueNAS on a VM and set it up as… Continue reading






