proxmox
-
Configure Redundant OPNsense IPsec Tunnels with BGP Between Two Sites (Part 2)
In the second part of this lab, we’ll set up the Site Firewalls. Each will have 2 WAN connections to different ISPs. Then we’ll set up four IPsec tunnels and BGP routing. This setup will guarantee a full redundant connection… Continue reading
-
Configuring High Availability for OPNsense Firewalls
In this post we are going to set up high availability for two OPNsense firewalls. Our firewalls are installed as VMs in two separate Proxmox nodes in our Lab. All our VMs in our Cluster use OPNsense to connect to… Continue reading
-
Setting Up OPNsense as a Zabbix Proxy
In this post we are going to set up OPNsense as a Zabbix Proxy to watch all hosts that are behind the firewall. Check the post for how to set up Zabbix in Docker containers in a Windows Workstation: Note:… Continue reading
-
Step-by-Step Zabbix Setup on Proxmox Clusters
In this post we are going to set up our Zabbix server to watch our Proxmox nodes and cluster. Check the post for how to set up Zabbix in Docker containers in a Windows Workstation: First we are going to… Continue reading
-
Create a Shared Storage Hyper-V Cluster: Complete Installation
We are going to install our classical Hyper-V Cluster with shared storage. In earlier posts, we installed an iSCSI Server on a TrueNas VM. Now, we can install the cluster and use our nodes as iSCSI initiators. This setup allows… Continue reading
-
Installing TrueNAS as an iSCSI Server for Hyper-V Clusters
Before installing our Hyper-V Cluster, we need shared storage on our cluster members. This setup ensures VMs can Live Migrate between nodes without disruption. In this post we’re going to install TrueNAS on a VM and set it up as… Continue reading
-
Configuring OPNsense in Proxmox Cluster for Secure Inter-VNet Communication
Check the earlier post of how the cluster was implemented: We have our Proxmox cluster set and running and vxlan is implemented on it. We can create all private VNets we need in our lab. Typically you’ll want a production… Continue reading
-
Windows VM Setup on Proxmox: Bastion Overview
We need a small workstation in our production network before installing the heavy stuff in our cluster. It will allow us to manage the rest of the VMs. The VLANs inside our cluster are completely isolated. Thus, this workstation will… Continue reading
-
Proxmox Cluster Setup and VxLAN
In this post we’re going to install Proxmox VE as the virtualization platform on our three physical nodes. Note: You can find the physical layout of the lab in the earlier post: Proxmox VE is a Debian-based distribution. It is… Continue reading
RacerX Steppenwolf 